Heavy Duty Water Heater Safety Valve FTVOGUE With Brass Plated Body And Pressure Relief 0.9MPa Rating G1/2in Connection Bottom Inlet Check Valve To Prevent Overpressure Backflow And Hot Water Energy Loss In Residential Systems

Brass Body Water Heater Safety Valve, 0.9 MPa rating
✔️ 1x valve, G1/2in bottom inlet, 0.9 MPa relief pressure

This safety valve is a pressure relief device designed for electric water heaters. It vents excess pressure to prevent overpressure and potential tank damage. The bottom inlet uses a G1/2in connection and the drain outlet must stay clear to vent properly. Built with brass casting and high-temperature forging for long-term reliability in residential systems. Size is approx 45 x 60 mm (1.8 x 2.4 in), max temp +100 C, max pressure 0.9 MPa.

✅ Brass body with high-temperature forging for long life
✅ G1/2in connection for common residential fittings
✅ 0.9 MPa relief pressure to prevent overpressure
✅ Bottom inlet check valve prevents backflow
✅ Drain outlet must stay unobstructed for safe venting

💡 What is a water heater safety valve and how does it work?

Here's a handy overview:

- Keeps system safe by venting excess pressure at the relief setting
- Prevents backflow into cold supply lines, reducing energy waste
- Designed for residential electric water heaters with G1/2in connections
- Requires an unobstructed drain outlet to vent safely